Even though we use our bathrooms often, some people make an effort to thoroughly inspect them. However, you should check all of the components from time to time and repair or replace any broken parts before a minor problem ends up being a major one. When it comes to home improvement items, an ounce of prevention is worth a pound of cure.
Where to Look in Your Bathroom for Possible Water Damage
The bathroom’s frequent use of water makes it especially sensitive to moisture accumulation and subsequent water damage. However, you can stop water damage by checking it regularly. Right here are a couple of areas to look for water damage in your bathroom.
Walls
Check for any problems with the paint or wallpaper. To start, run your hand along the wall, looking for any signs of moisture. Any moisture behind the wall could suggest a leak, which should be checked even more. Click here for more details.
After that, check if the exhaust fan is working properly. If the fan turns slowly because of collected particles, clean it using compressed air from a can. Obviously, if the fan stops working, repair it immediately because your exhaust fan is your best protection against moisture damage.
Shower or Bathtub
Look for mold in the grout or lose pieces of the grout. Immediately, fix any places where the grout has fallen away. Next, check the showerhead and fixtures to ensure they remain in good working order and free of rust or lime buildup. Next, make a note of any tile damage and check out the drain attentively. Lastly, make sure the shower door seals securely and does not leak water onto the flooring.
Toilet
The toilet is a little difficult because the area is limited, but get your flashlight out and thoroughly check the area surrounding the fittings and on the back of the tank for any indications of moisture. Also, inspect the tank for any leaks at the point where the tank joins the base.
A vulnerable water junction is a toilet. Look for leaks near the toilet seat, in the hose, and beneath the water tank in the water lines. Check the toilet rim and tank seals for leaks if there are any traces of wetness on the floor around the toilet. Remember that deodorants that are hung from the toilet bowl can cause blockages. To learn more, visit PuroClean.
Bathroom Vanity
If you have a leak, pay special attention to the cabinet’s interior because it’s a perfect place for mold to develop. Check out the seals around the container carefully and change any that are damaged right away.
If not handled soon, a slow drip can result in even more damage than you would realize. If considerable damage has already happened, your best solution is facing the bullet and getting a new bathroom vanity cabinet. In many cases, it’s more convenient than cleaning and repairing an existing cabinet.
Pipes
Because most pipes lie inside the walls, signs of water damage are difficult to detect. However, pay special attention to wetness and discolorations on the flooring and walls, as they might indicate a hidden plumbing problem. Check the humidity levels in nearby areas too. Visit property restoration Wakefield if you experience water damage at home.
Conclusion
So, check for any traces of moisture or water damage in the bathroom’s flooring and walls to see any indication of water damage. If you see some warping or staining, call a professional to ensure there isn’t a leak.
Also, don’t limit your search to the bathroom. Enter the areas that share the bathroom’s walls. The wet spot may occasionally go through the other side of the wall, however, the problem is caused by a leaking bathroom pipe.
Bathrooms are the most common areas subjected to regular water abuse and are highly dangerous to water damage. Still, the cost and damage can be reduced if you comply with these few simple processes to prevent water damage.
