How to Avoid a Frozen Sump Pump

A suspended sump pump discharge hose indicates bad news for homeowners who have sump pumps installed in their cellar. If a sump pump hose freezes, the pump will work more difficult and will eventually fail due to overheating.

That means it will not perform its job of releasing water that accumulates around the foundation. Therefore, you must help prevent sump pump lines from freezing to maintain the cellar protected from flooding.

The purpose of a sump pump, of course, would be to expel any rainwater that pops into your property. You may hope that water intrusion is not an issue in the winter months, but that is rarely the case. Instead of rain, you are coping with melted snow (even though we receive our share of chilly storms, also).

Tips to Prevent a Sump Pump Discharge Line from Freezing

  • The sump pump discharge line must be either buried from the lawn or extended out above-grade at a downward slope.
    1. When the pipe is buried, it should be buried at least 12 centimeters beneath the frost line (the maximum thickness of ground below that the soil does not freeze). The section of pipe in which the pipe meets the ground in the frost line and at the end of the point where the water flow is where the pipe usually freezes.
    2. Property owners who select an above-grade solution must extend the discharge line from the home at a downward slope. The slope doesn’t have to be intense, but continuous so that the water may flow. A hose that’s smooth, rigid, and freeze-resistant should be joined to the end of the discharge hose, and ought to discharge water at least 6 meters away from the foundation. If the pipe is properly sloped, gravity can help keep the water flowing (standing water in the pipe is far more likely to freeze).
  • The sump pump discharge line and the intake section ought to be coated to shield against freezing. A larger diameter pipe can be attached to the end of the toaster hose using straps and wires, leaving an air gap between the hose and the bigger pipe. As a more straightforward insulation alternative, the outside pipe can be coated with hay (a natural insulator) and a tarp. Automotive anti-freeze shouldn’t be poured into the sump pump.
  • The sump basin ought to be assessed regularly, along the sump pump also has to be examined from time to time to make sure it is working properly. Additionally, the sump pump shouldn’t discharge water on the sidewalk and driveway to prevent dangerous ice.
  • When the sump pump tube is rooted, portable heaters can be used to thaw it. Employing a blow torch to thaw the line is a terrible idea as that may cause harm or harm to the property. If DIY thawing isn’t an option, it is best to call a professional contractor to thaw out the line.

The PuroClean team stands ready to give expert restoration solutions to some homes affected by fire, water, or mold harm. Check this website if you’re looking for professional property restoration companies.